Forums >> Revit Building >> Technical Support >> Enlarged Floor Plan Issues

Filly43

active

Joined: Wed, Jul 24, 2013
1 Posts
No Rating

Ok. First off Im using Revit 2013 for architecture.

Now my questions: The floor plan sheet im working on is really tight graphicly (meaning I dont have a lot of room to be adding more call outs, key noting, or elevation markers.  What I want to do is take care of a lot of annotation in the enlarged floor plans derived from the call outs that i have already created with in the floor plan sheet. So here is where my problem starts.  The callouts I created in the floor plan sheet are reletivly small, so when Im working in the enlarged floor plan sheets I still dont have enough room with in each individual workspace (within the enlarged floor plan sheets) to add my annotations such as elevation markers, keynotes and sections.  Is there a way to adjust the size of the workable space (with in the enlarged floor plan sheet) and not affect the size of the call outs on the floor plan sheets? Remember I almost have no room left on the floor plans to make the call outs any bigger. Is there a way to disassociate the size fo the call outs and work space they create from each other but still have them reference eachother? I feel like there is some box somewhere that I just can't find to make this possible. 

This user is offline

WWHub

site moderator|||

Joined: Tue, May 16, 2006
13079 Posts

I'm lost! ... just don't understand what you are asking.

The new view created by the callout can be any scale.

This user is offline

Can't make an enlarged plan

7

Enlarged Plan callouts disappear

3

Building Section cut appear in enlarged plan

1

Enlarge Floor Plans

12

roof not visible in enlarged plan view but visible in all other views 2017

2