Forums >> Revit Building >> Technical Support >> Topo hatch disappear under building pad

rimon

active

Joined: Wed, Nov 28, 2012
2 Posts
No Rating

Hi,

I'm using revit architectural 2012, and I'm experiancing an annoying problem, where if I'm viewing floor plan under another building pad, the earth hatch disappear under that pad. although the floor plan cutting plain is cutting into the earth under this pad

Another problem is when ever this situation happenes, the earth thick cut line showing in plan gets sent behind the earth hatch and I only see half the thickness of that cut line. this only happens when I have this hatch void created in plan view under the building pad.

see attched images

Revit file here

thanks a lot in advance.

Attached Images

This user is offline

dgcad

active

Joined: Thu, Mar 17, 2005
1231 Posts

Try turning off the Pad category.

That thick line looks like the Primary Contour line not a cut line.

-----------------------------------

FULL 'DOWNLOAD ACCESS' to all 850+ CADclips videos for only $150

This user is offline

View Website

rimon

active

Joined: Wed, Nov 28, 2012
2 Posts
No Rating

Thanks for your reply, 

I tried to turn it off but nothing happens, 

The thick line in the second image is a cut line, it is thicker than the primary contour line, but this is not the problem, the problem is in the first image where the cut line doesn’t show up any more. if you look at the revit file and zoom on the cut line you can see that the hatch is on top of the line and you can only see half the thickness of the cut line.

This user is offline

Monkers

active

Joined: Fri, May 18, 2012
0 Posts
No Rating

I had a similar problem. For future refernce if anyone stumbles apon this thread. I found it was to do with the phase which I created the pad in. experiment how it effects your model, I ended up deleting it and remaking it in the correct phase. 

This user is offline

rimon

active

Joined: Wed, Nov 28, 2012
2 Posts
No Rating

Could you please clarefy what you meen by bui;lding phase. could you provide quick steps to do that.

Thanks

This user is offline

Topo is struggling

4

Topo Hatch not showing up under building pad - 2013

14

Topo surface/Building Pad problems b/w Existing and New Construction phases

3

Topo slopped pad (parking lot/road)

4

Building Pad Problem

7