Forums >> Revit Building >> Technical Support >> Floors show in all Views but 3D

MongooseST1

active

Joined: Wed, Nov 21, 2007
77 Posts

i HAVE A MEZZANINE SHOWN AS A FLOOR ELEMENT. It shows in all section elevation and floor plan views BUT when I go to the 3D view it is missing I have cheked all visibility checkmarks in th Visibility/Grpahics pull down and they are all set. Can anyonme shed some light as to why in all views it shows and 3D it does not?

Also in the 3D view my main floors show, but only the mezzanine is missing

This user is offline

Typhoon

site moderator|||

Joined: Tue, May 22, 2007
5921 Posts

Wierd... did you create that with the "floor" tool? not a "mass"?

Put some images of that 3D view...

-----------------------------------

I Hope and I Wish to LEARN  more, and more, and more.... REVIT

This user is offline

MongooseST1

active

Joined: Wed, Nov 21, 2007
77 Posts

I created it using floor. If I right click and verify properties it is defined as a floor. enclosed is screen shots

This user is offline

Typhoon

site moderator|||

Joined: Tue, May 22, 2007
5921 Posts

Didn't you "Hide in view" that element in that view? check that, click on "Reveal hidden elements"

Attached Images

-----------------------------------

I Hope and I Wish to LEARN  more, and more, and more.... REVIT

This user is offline

jraiten

active

Joined: Fri, Sep 19, 2008
1 Posts
No Rating

Check the disepline setting.  if you used a structual slab and are not on coordination it may not show up.  Are you worksetting elements to seperate workseta?

-----------------------------------

Jason Raiten,

Assoc. AIA, LEED AP, CSI, CDT

This user is offline

Walls, Floors and Roofs to show hatch pattern AND color poche?

2

Section marks show up in all views

8

I accidentally deleted my elevation views.. help please

8

Progataing property lines to floors

2

show ground plane in perspective views

1