Forums >> Revit Building >> Technical Support >> Revit 2011 - Curtain Wall doors on Schedule for correct level

daxoliveira

active

Joined: Tue, Jan 11, 2011
1 Posts
No Rating

I have a 2 story curtain wall. The door on the first floor is showing up on the schedule for the correct level, no problems with it. There is a door on the second floor of the curtain wall, which goes out to a deck. This door is showing up on the door schedule as being on the first floor. I have changed the curtain wall's base constraint to be the second floor and adjusted the base offset for the wall base to still be on the first floor level. Both doors on first and second level still show up as being on the first floor in my schedule. How do I make each door show up on their correct levels in the door schedule?

This user is offline

DavidBruinsma

active

Joined: Sun, Jun 3, 2012
13 Posts

The only thing i can think off is to split the certain wall horizontally at the first floor level. That way the ground floor part of the wall and its doors will schedule via the ground floor, and likewise the first floor curtain wall door  SHOULD schedule as a First floor door.

Experiement and let me know if that works.

regards

David Bruinsma

This user is offline

Schedule curtain wall doors

0

Schedule curtain panel by level?

9

Storefront Doors in Door Schedule

9

Scheduling Curtain System doors - will not identify level

0

tagging curtain wall doors

7