Forums >> Revit Building >> Technical Support >> Section cuts

agall51

active

Joined: Fri, Apr 6, 2012
2 Posts
No Rating

Trying to poche the section cut that I have made.  Using (VG) I filled in my walls, ceilings, floors, etc with a poche and all is left is my topography and it doesnt seem to work.  Is there a way I coud do this?  I have been trying to create a filter or something that could layer over the topography like you can do in Illustrator but I have found that is working.

This user is offline

WWHub

site moderator|||

Joined: Tue, May 16, 2006
13079 Posts

The poche for the site in section views is controlled from the massing & site and modle site pulldown.  There you can set the poche pattern and the elevation of the poche base.

For Elevation of poche base, enter a value to control the depth of the cross-section of earth, for example, –30 feet or –25 meters. This value controls the poche depth for all topography elements in your project.

This user is offline

Section cuts WAAY too deep!

5

Rouge sections cuts

2

Multiple Section Cuts as duplicates

1

Detail Cuts

1

Phases and Section Cuts

0