Forums >> Revit Building >> Technical Support >> color legend trouble

michB

active

Joined: Tue, Mar 31, 2009
38 Posts
No Rating

Revit 2012

I am very fluent with color legends but have run into trouble with one room that will not color?  I had thought it was associated with view range as that is the only difference in comparison to the other rooms that do color and it does have a sunkin area in the floor.  It also shows a complete boundary but does not fill like the other rooms do.....

Any ideas?

with thanks....Michele

This user is offline

mhans

active

Joined: Tue, Nov 7, 2006
456 Posts

It has got to do with view range. Does the room show up in your schedule? Do you have a screenshot?

-----------------------------------

Motto: "No Post left behind"

This user is offline

michB

active

Joined: Tue, Mar 31, 2009
38 Posts
No Rating

The room does show up in shcdule and I do have a screen shot.  I did start playing further with view range and have some odd results.  I can create a view range give it a lower setting to allow for sunkin floor....here's the kicker-the color now shows up outside the view range that is lower.  So where I make changes in the view range nothing shows but where I don't make any changes it does but only with the seperate view range....starting to get convoluded in my explanation.

attach:You will see at the bottom left beside legend there is an area that appears as if the building is cut off....that is the area where the view region is located.  Room 175 will not show any color without that view region as part of the plan.

This user is offline

michB

active

Joined: Tue, Mar 31, 2009
38 Posts
No Rating

note also when I drag the cropped region the color in 175 disappears......

This user is offline

WWHub

site moderator|||

Joined: Tue, May 16, 2006
13079 Posts

That PDF is really kind of worthless to us.  When you post something like that, zoom in and add some temporary notes to tell us the problem.  We don't know your project.

Where is this room hosted?  On this level ? .... or on the sunken level?  That could be your problem.

This user is offline

michB

active

Joined: Tue, Mar 31, 2009
38 Posts
No Rating

apologies-thought a visual might help.  I have found that when I eleiminate one of the walls it all works as it should.  Will continue to see what the issue is with the wall. 

thanks for your help.  always appreciated.

This user is offline

Lines color legend

9

Color Scheme Legend Issues

3

Can I have all my areas on drawing but only few values on Color fill legend?

0

Area Legend not showing

4

Color Legend Disappears

3