Forums >> Revit Systems >> Technical Support >> View Range Issues

raja15

active

Joined: Mon, Feb 21, 2011
84 Posts

I am having some issues with my view range in one of my ceiling plans at the moment.

I have the view cut set to 2400 from the floor level, however it is not showing up some of my walls which have openings of 2400.

I cannot make the view cut any lower or some of the external 3D roofs begin to show in the view and distort the walls which are attached to them.

Is there maybe a way I am able to create multiple cut planes so that I am able to see both the 2100 and 2400 openings in the plan view?

Any information or help would be appreciated.

This user is offline

newrevituser

active

Joined: Mon, Apr 11, 2011
18 Posts
No Rating

raja15,

If it's only for visual purpose, duplicate the plan view, set the cut plane offset to desirable height (i.e. = 2400mm) then hide the roof in that plan view.

Hope it helps.

This user is offline

WWHub

site moderator|||

Joined: Tue, May 16, 2006
13079 Posts

Plan regions might work for you here.  With a region, you can set different VP ranges from the main view.  You can read about these in your help.

This user is offline

view range issues

1

Revit MEP 2012-View Range

2

View Range for Revit Link

8

Revit 2009 help with shaft view issues

4

Plan cuts incorrectly at windows despite correct view range

2