Forums >> Revit Systems >> Technical Support >> View range problem

tossaxe

active

Joined: Tue, Sep 7, 2010
8 Posts
No Rating

Hello,For some reason I can't get revit to NOT display a floor below the associated level.

The view range bottom cut and view depth are both set above the floor (not intersecting the element)Tried different clipping options and associating the floor with a different level, Nothing that I can think of helps...

Any ideas? pelase help =]

This user is offline

gebber

active

Joined: Thu, Jan 24, 2008
144 Posts

try setting it below the floor (bottom & level)

This user is offline

View Website

mbsteve

active

Joined: Fri, Sep 22, 2006
759 Posts

I wondering if you have an underlay of the floor below?

This user is offline

tossaxe

active

Joined: Tue, Sep 7, 2010
8 Posts
No Rating

Thank You but neither work, it's not an uderlay.. starting to think that it's a system bug =/

This user is offline

tossaxe

active

Joined: Tue, Sep 7, 2010
8 Posts
No Rating

Here's a print screen of the problem. I've outlined the troublesome floor red.

Attached Images

This user is offline

gebber

active

Joined: Thu, Jan 24, 2008
144 Posts

am I correct, you do see this floor in wireframe (as shown in the 2nd image)?

Is there a site above the floor (as shown in the 1st image)?

If so the site might cover up the floor in the shaded view, check your VG.

This user is offline

View Website

mbsteve

active

Joined: Fri, Sep 22, 2006
759 Posts

What I see on your posted clips is view depth -120 for level 1 if you don't want to see that exterior slab set the view plane depth above that. If your interest is showing the footing lines and not the small slab just select it and turn it off for clarity, looks like you may have some conflicts there in any case per your section.

This user is offline

View range problem

9

Associated levels in the view range.

2

View range of structural framing

1

view range issues

1

view range

1