Forums >> Revit Building >> Technical Support >> Level Visibility in different Views

coattardo

active

Joined: Tue, Oct 12, 2010
2 Posts
No Rating

I have a sheet setup with two elevations and one section on it. In the section, I need to callout a set of levels (storefront opening, soffit level, etc) without having them show up on the two elevations. Is there anyway to add a level marker to one particular drawing without it appearing on other drawings on the same sheet?

Also, is there any way to customize the shape of the crop region for a drawing? I need to hide a corner of an elevation, and a rectangle is not doing the trick.

 thanks. 

This user is offline

WWHub

site moderator|||

Joined: Tue, May 16, 2006
13079 Posts

Part one - Read this in your HELP: Example of Datum Visibility in Project Views

In addittion, you can aklways "hide in view" any element.

Part two: No way to cutom the crop region.  You can hide the ccall-out bubble and use linework then in the view, use masking regions.

This user is offline

coattardo

active

Joined: Tue, Oct 12, 2010
2 Posts
No Rating

'hide in view' works temporarily, but when I plot the sheet everything is visible.

 regardless, thank you for your time

This user is offline

WWHub

site moderator|||

Joined: Tue, May 16, 2006
13079 Posts

Hide in view is not temporary !!!!

The eyeglass is temporary hide in view.

To Hide in view, right click on the object and pick hide in view.

This user is offline

Visibility/Graphic Overrides for all views at once

10

Visibility Problem - please help!!!

3

Design Options - Efficiently Changing Option Visibility in Multiple Views

1

Hide Visibility in all views?

7

Sections, different level/views

4