Forums
|
Forums >> Revit Structure >> Technical Support >> hollow core planks
|
|
|
active
Joined: Wed, Feb 18, 2009
20 Posts
No Rating |
i'm working on my first Revit Project. A pre-cast concrete structure. i'm having trouble with my hollow core planks running thru my pre-cast wall panels at my stair towers. My walls run from the basement level up to the 3rd floor. i've attached a angle to the wall panel to support the H.C. planks. The planks run over the angle and thru the wall to the pre-cast beam around the exterior. i'm was able to cope the planks around the pre-cast columns. how do i keep them from running thru my wall panel and how do you cope a H.C. plank around the corner of the wall? Thanks in advance
|
This user is offline |
|
 | |
|
|
active
Joined: Thu, Mar 20, 2008
15 Posts
No Rating |
you can draw the planks longer than they actually need to be, draw a reference plane at the face of the wall and then use the cut geometry tool to cut the planks at the desired angle..
|
This user is offline |
|
|
|
active
Joined: Tue, Nov 4, 2008
28 Posts
No Rating |
JACMD, I tired the cut geometry idea, and worked great in one direction, but what if I need to to cut the plank in two directions? What I've got, and I think this is what voglerb is asking also, is how to I cut a hollow core plank around a corner? My planks are bearing on an exterior wall, and the wall jogs in and out, there are several instances where the wall jogs out right in the middle of a plank. I need to cope the plank so that half of it bears on the wall at 20' of span, and the other half spans out to 24'. Is there a way that I can select two reference planes at same time, to use for my cut geometry?
|
This user is offline |
|
|
|
active
Joined: Thu, Jun 11, 2009
1 Posts
No Rating |
Use Modelling - Opening - Opening by face Select the face - draw the shape you want to remove - Finish sketch
|
This user is offline |
|
|
|
active
Joined: Tue, Nov 4, 2008
28 Posts
No Rating |
Thanks vivhowe! Modelling an opening by face worked great. That's exactly what I needed to do!
|
This user is offline |
|
|
|
Similar Threads |
|
Hollow Core Planks Modeled as Slabs Instead of Beams. |
Revit Structure >> Technical Support
|
Mon, Feb 8, 2010 at 4:06:48 PM
|
4
|
|
Hollow Core Block Wall |
Revit Structure >> Technical Support
|
Wed, Aug 13, 2008 at 7:53:37 PM
|
0
|
|
Trimming Precast-Hollow Core Slabs |
Revit Structure >> Technical Support
|
Wed, Jun 3, 2009 at 10:52:21 AM
|
0
|
|
hollow mullions |
Revit Structure >> Technical Support
|
Thu, Sep 4, 2008 at 5:46:00 AM
|
10
|
|
Timber Planks as wall |
Revit Building >> Tips & Tricks
|
Thu, Jul 25, 2013 at 8:11:07 AM
|
8
|
|
|
Site Stats
Members: | 2105673 | Objects: | 23178 | Forum Posts: | 152305 | Job Listings: | 3 |
|
Search
53362_hollow_core.pdf