Forums >> Revit Structure >> Technical Support >> Just a quicky..

KES1

active

Joined: Tue, Jun 24, 2008
22 Posts
No Rating

Hi guys,

We dont use Revit Structure a great deal in the office at the moment but this could soon be changing. We have a job coming up where the client wants basic M&E shown on the drawings, mainly pipe runs etc. Can this be done in RS or do we need to buy RMEP?We need to be able to show pipe flanges if that makes any difference.

 Thanks

Adam

This user is offline

View Website

coreed

site moderator|||

Joined: Fri, Feb 10, 2006
1874 Posts

-----------------------------------

best regards,

coreed,aia

bmpArchitects,Inc.

"Revit has to be implemented, Not installed." 

Long Live Revit

This user is offline

caduk

active

Joined: Tue, Jul 1, 2008
16 Posts
No Rating

I believe you would need MEP, this im 90% sure of.However, assuming that you can load families into RS. Can you also create families in RS? If so then you could possibly make your own elements. Would require effort to get just a few basic things in there, and even then there could be other aspecs of RS restricting you from doing so.

It would be pretty bodgy - get MEP mate.

This user is offline

KES1

active

Joined: Tue, Jun 24, 2008
22 Posts
No Rating

Cheers guys,

We dont really touch M&E in our office but if needs must then we'll have to get the MEP package.

This user is offline

View Website

cutting a hole in a massed floor/roof

0

Finish Profile at Stone Coping

0

Is there a way to put specific objects you created on a differnet layer?

0

How do you center a cased opening in a wall?

1

detail lines

0