Forums >> Revit Building >> Technical Support >> propagate extents

emosms

active

Joined: Fri, Sep 21, 2007
42 Posts
No Rating

Why some of my grid lines are not possible to propagate to all levels?i put up the grid line system in level 1 and then i set the vertical levels (around 12) and then revit surprised me nasty, not allowing to propagate all my grid lines to all my levels. 

This user is offline

View Website

emosms

active

Joined: Fri, Sep 21, 2007
42 Posts
No Rating

I got it. In an elevation view one have to see the grid lines (datums) as vertical lines.Then simply make sure that the grid line intersects all the levels in the elevation view and you will be able to propagate it to all the levels.

 A bit of a problem is when the grid line is not perpenidicular to the elevation plane.I have some grid lines at 15 and 75 angles, cause of the irregular shape of the building. In such a case you have to make copies of some elevations (in a plan view) and rotate them so that they face the grid lines perpendicularly. Now you can go to the new rotated elevation view and observe and control these grid lines.

This user is offline

View Website

grid lines resetting unitentionally

0

grid lines question revit 2009

1

DOES ANYBODY HAVE A GOOD WORK AROUND FOR GRID LINES?

3

PROPAGATE EXTEND

1

Grid lines moving together in different floor plans

0