Forums >> Revit Building >> Tips & Tricks >> Reporting cut and fill volumes on terrain

JustinT

active

Joined: Fri, Nov 16, 2007
93 Posts

Though not really designed for Civil work (road layout and drainage etc), Revit does allow the user to generate terrain (topography) from scratch, imported DWGs or DXF files, or even by importing a CSV points file. Most Revit users know how to do this, but what many don't know is that Revit can calculate the cut and fill volumes from an original terrain with that of a developed site.

This helps the user to determine the costs of landscape modification during site development.

Creating cut and fills is a very straight forward process, but not that many people seem to have heard that revit can do this... so here's the tip

http://www.revitup.co.za/main/page_tips__tricks_terrain__cut__fill_volumes.html

Regards

 Justin

Hope this is useful to some of the new users out there :o)

This user is offline

Reporting on cut and fill volumes with Revit

6

CUT AND FILL - PADS WHICH DO NOT SHOW C&F VOLUME ON A SCHEDULE

8

Topography Schedules and reporting Pad cut/fill.

1

How to easy measure the excavation mass in REVIT?

0

Cut and fill reporting

3