|
Forums >> Revit Building >> Technical Support >> Section tag font not changing in "side" section tags
|
|
|
active
Joined: Wed, Aug 29, 2007
417 Posts
 |
Hello there, I am having issues with my detail section tags. I have a detail section tag in front elevation and our font, lineweight works fine. But that SAME detail tag in a side view does not have the correct font and lineweights. Why is this? I cannot find where to do this? ANy ideas? Thanks Lorne PS-issue is attached.
-----------------------------------
AutoDesk Revit Certified Professional
Denver, CO
Revit Architecture |
This user is offline |
|
 |
|
|
|
active
Joined: Tue, Nov 7, 2006
456 Posts
 |
Right click the Front elevation view and select "Create View Template from View" and then right click your Section View "Apply View Template" . See if that works.
-----------------------------------
Motto: "No Post left behind" |
This user is offline |
|
|
|
active
Joined: Wed, Aug 29, 2007
417 Posts
|
No such luck. If you take a look at that image. There's another front view of a detail section and that is label 18 and correct font. the incorrect detail tag is in that same view. Any other ideas?
-----------------------------------
AutoDesk Revit Certified Professional
Denver, CO
Revit Architecture |
This user is offline |
|
|
|
site moderator|||
Joined: Fri, Apr 14, 2006
584 Posts
 |
You will need to modify the Callout tag if you want it to match. There is two different Tag Families. One for the Section and one for the Callout. Right click the view and click Edit/New and you will see the two different parameter lines. One for Section Tag and one for Callout tag.
|
This user is offline |
|
|
|
active
Joined: Wed, Aug 29, 2007
417 Posts
|
No such luck. If you take a look at that image. There's another front view of a detail section and that is label 18 and correct font. the incorrect detail tag is in that same view. Any other ideas?
-----------------------------------
AutoDesk Revit Certified Professional
Denver, CO
Revit Architecture |
This user is offline |
|
|
|
site moderator|||
Joined: Fri, Apr 14, 2006
584 Posts
|
I must be missing the question because in the view on the left I see a Detail Section symbol  #1 and a Detail Callout symbol (#17). These are two different symbols. The view on the right contains the intersecting view of the #17 callout. Now if I am understanding your question, you are asking why the #17 on the left doesn't match the #17 on the right. If so then check out my first post. If not then please explain further.
|
This user is offline |
|
|
|
active
Joined: Wed, Aug 29, 2007
417 Posts
|
Hey Grimes, First off, no sorry, you understood me perfectly. I accidentally hit refresh and it re-posted my question. Disregard that second post. As for my issue, that fixed it  I didn't realize that that was a callout tag not a section tag. I edited the Callout Head family and now it's fixed. Thanks so much, Lorne
-----------------------------------
AutoDesk Revit Certified Professional
Denver, CO
Revit Architecture |
This user is offline |
|
|
|
Search