Forums >> Revit Building >> Technical Support >> Framing Plan and floor visibility questions

Coffeefiend

active

Joined: Tue, Oct 2, 2007
36 Posts
No Rating

Afternoon all,

I've been putting together a framing plan for a project I'm working on, and I need some help. The home I'm working on has 2 stories and a basement. I've modeled in the beams and beam systems to hold up the first floor (between the basement and 1F). Because I modeled it in the 1F view, all of the 1F walls are visible in the drawing. I realize that I could turn off the walls if I wanted to, but I'd like to show the basement walls underneith instead of the 1F walls. I've got the underlay set to B1, but the lines are still to faint to see well. However, the beams arn't visible from the B1 view. See the attached drawings- the 3D image is to illustrate that the beams are modeled in the correct place, but I'd like to show them on the B1 plan instead of on the 1F plan. I'm using Revit 2008. Any help would be greatly appriciated. Thanks a lot!

This user is offline

cganiere

active

Joined: Tue, Feb 15, 2005
75 Posts

-----------------------------------

Christopher Ganiere, NCARB, LEED AP

www.developmentone.net

Skype: ArchitectCRG

This user is offline

View Website

Framing Plan

12

Can't see Structural Framing from attached Revit Link in any Floor Plan

11

Walls in Framing Plan

3

Floor plan is missing in view

1

Framing Plan - Getting Walls Below Floor to Show Openings

9