These is a 2d Post Tension Cable call out and symbols. Below is a list of the files that are used with it. Please let me know if you see something that would make these better.

PT - Post Tension.rfa is the main file. It's the one will use to place your cable. I have 4 Family Types setup in it. It can be easily changed up to do what ever you need.

PT - Force Tag.rfa is the tag that you need to call out the Force on that Cable. There are 2 types setup here. one for Kips Per FT and one for Total Kips.

PT - Text is used to show the height of the cable. PT-text are just symbols you can place them were ever you need them.

PT - Offset End. I made it up so if i need to work around an opening in the slab. It's still in Beta. It will get you around the opening but you are going to have to work for it. I'm hoping to think of a better way to do it later on.

You will also need to add two Parameters to your Shared Parameters. One called FORCE for Discipline Structural and Type of Parameter Force. The other is FORCE PER FOOT for Discipline Structural and Type of Parameter Linear Force.

Product Version: Revit Structure 2013

1529 Downloads

Parametric instance of 8"x48" hollow core precast plank.

No rating

Product Version: Revit Building 9

5426 Downloads

Fully adjustable beam:

- Rectangular profile (b=..., d=..., b1=0, d1=0)

   OR

- 'I' profile (b=..., d=..., b1=..., d1=...)

- Width (b) & height (d),

- Arch height (Arch_h),

- Material.

No rating

Product Version: Revit Architecture 2010

4770 Downloads

Reference plane and lines may need some adjustments

No rating

Product Version: Revit Architecture 2012

1444 Downloads

Double Tee used in precast construction

Product Version: Unknown

6384 Downloads

No rating

Product Version: Revit Architecture 2011

731 Downloads

Feel free to use and experiment with our free floor template. If you enjoy our content please see RevitNetwork.com for more.

Product Version: Revit Architecture 2015

709 Downloads

350mm Thick Hollow Core Slab

Product Version: Revit Structure 2014

5574 Downloads

100mm thick Hollow Core Slab

Product Version: Unknown

5338 Downloads

300mm thick Hollow Core Slab

Product Version: Unknown

5260 Downloads

parametric hollow core beam.

Product Version: Revit Architecture 2009

4755 Downloads

parametric hollow core beam.

No rating

Product Version: Revit Architecture 2009

2587 Downloads

Pre-Cast Wall Lintel for openings, Parametric, Left and Right overhangs, Depth, height AFFL and Material. Opening only for the Lintel, no door/window opening

Product Version: Revit Architecture 2009

8152 Downloads

A roof beam

Product Version: Unknown

4325 Downloads

This is a muly cell auto dimension Box Bridge for road.

In autoset dimension for foundation Raft, end & inner webs as well as deck slab is set as per span, while in MORTH setting one can set these dimensions manually.  For longer length of bridge  repet & align family providing expansion joints. In this case Return walls & approach slabs be off. Provision to off/on for Cut off wall, Raft Key, left & right Return wall & Approach Slab have been provided. Railing of main bridge / on approach can be set indepentely. Number of span is ristricted as total length of bridge may not exceed 30 mtrs. for more length add more bridge. The box type bridge is revised up to date, as this was loaded in 2006 on this site. Lallan Ji Upadhyay. Varanasi.

No rating

Product Version: Revit Architecture 2015

884 Downloads

It is a RCC Box Bridge for one to multy spans. Number of spans, Clear span, Clear height , Road width params can be set independentely. Approach slab, Return walls, Cutoff walls, Drop key etc. can be placed/remove at will. In autoset dimension for foundation Raft, end & inner webs as well as deck slab is set as per span, while in MORTH setting one can set these dimensions manually.  For longer length of bridge  repet & align family providing expansion joints. In this case Return walls & approach slabs be off. Provision to off/on for Cut off wall, Raft Key, left & right Return wall & Approach Slab have been provided. Railing of main bridge / on approach can be set indepentely. Number of span is ristricted as total length of bridge may not exceed 30 mtrs. for more length add more bridge. The box type bridge is revised up to date, as this was loaded in 2006 on this site. Lallan Ji Upadhyay. Varanasi.

No rating

Product Version: Revit Structure 2018

435 Downloads

Precast concrete. Parametric L shaped beam.

No rating

Product Version: Revit Architecture 2013

3469 Downloads

No rating

Product Version: Revit Structure 2011

2021 Downloads

ribbed slab section & reinforcement , permanent hollow block used

Product Version: Revit Structure 2011

3686 Downloads

Dầm cầu trục. 

Product Version: Revit Architecture 2011

1663 Downloads

3d modeling for te famouse snowflake tower 

Product Version: Revit Architecture 2018

1137 Downloads

Spaceframe - Space Frame - Gian khong gian

No rating

Product Version: Revit Architecture 2011

2435 Downloads

http://stahlton.co.nz/products/rib-infill/

Product Version: Revit Architecture 2018

478 Downloads

this is a face based family (Truss Anchor for Concrete walls). Use the vertical face to place it (i.e. the vertical side of the concrete wall) and then just align it with the truss. 

If you find this useful, please subscribe to my channel https://www.youtube.com/channel/UCJZt58oErg137aaKJpfygRw

Paypal donations: omul-andrei@protonmail.com

Bitcoin dontations: bc1q9qgjlt7x2yt6uvv869qjyd4nsuz8nhxkg3ck73

Etherium dontations: 0x2B5B713491c2D83889d546C31C115548c642d070

No rating

Product Version: Unknown

335 Downloads

Product Version: Unknown

329 Downloads

Viga parametrica de hormigon, tipo canaleta

(Concrete Beam Parametric, type gutter)

Product Version: Revit MEP 2010

3246 Downloads