This is a Generic Wall based supply Water Valve I made for toilets and sink water supply.

Product Version: Revit Architecture 2012

5841 Downloads

1500x535 double end bowl sink with drain board

Product Version: Revit Architecture 2014

11764 Downloads

1800x535mm double centre bowl sink with drain board

Product Version: Revit Architecture 2014

10255 Downloads

Filtrine Model ES-2-RFC-IW - Remote in-wall recirculating chiller/purifier for serving chilled/purified water to multiple dispensers within 10'-100' via recirculating drinking water loop. (2) Gal. storage tank. Serves a population of (100), (assuming 1 qt./day/person typical usage).

Product Version: Revit Architecture 2012

1455 Downloads

I modled this for a project at work it's a Glycol storage tank c/w baffel, pipe connections(top & bottom) and base. It's used in a pharmaceuticle plant. This is my frst upload, feel free to mess about with it and I hope it helps :)

Product Version: Revit MEP 2013

7050 Downloads

Filtrine Model ES-4-RFC-IW - Remote in-wall recirculating chiller/purifier for serving chilled/purified water to multiple dispensers within 10'-200' via recirculating drinking water loop. (4) Gal. storage tank. Serves a population of (200), (assuming 1 qt./day/person typical usage).

No rating

Product Version: Revit Architecture 2012

738 Downloads

33 12 13.13 CSI Classification

4" Backflow Preventer DCV Assembly based on WATTS 909 NRS

Product Version: Unknown

4570 Downloads

4-slope shower with drain

No rating

Product Version: Unknown

1988 Downloads

4-slope shower with drain

No rating

Product Version: Unknown

10485 Downloads

Rain water tank sits beneath topography with a slight rise above the surface for access and 4 connections at the base. I deal for use on small blocks to maximise space.

W 2440 x L 3780 x H 1270

Material (design is meant to be Poly), Length and width adjustable parameters and i have added pipe connections however i am not HVAC so others may be able to improve on the realistic fitting diameter sizing.

No rating

Product Version: Revit Architecture 2015

3403 Downloads

Filtrine Model ES-6-RFC-IW - Remote in-wall recirculating chiller/purifier for serving chilled/purified water to multiple dispensers within 10'-400' via recirculating drinking water loop. (6) Gal. storage tank. Serves a population of (300), (assuming 1 qt./day/person typical usage).

Product Version: Revit Architecture 2012

1169 Downloads

Filtrine Model ES-8-RFC-IW - Remote in-wall recirculating chiller/purifier for serving chilled/purified water to multiple dispensers within 10'-400' via recirculating drinking water loop. (8) Gal. storage tank. Serves a population of (400), (assuming 1 qt./day/person typical usage).

No rating

Product Version: Revit Architecture 2012

682 Downloads

915x535 single end bowl sink with drain board

Product Version: Revit Architecture 2014

8466 Downloads

The Automatic Control Valve shall be a Ductile Iron Body and Cover design. The Valve shall have a resilient seal disc, guided top and bottom; Bottom guide will be vanes, sliding in a stainless steel seat arrangement, single seated line pressure operated, diaphragm actuated, pilot controlled, valve. The valve shall seal by means of a stainless steel seat. All parts are to be replaceable in the field without removing the valve from the line. All flange dimensions including face to face lengths shall conform to ISO Standards.

Product Version: Unknown

1044 Downloads

Generic ADA flush valve toilet w/ 19" seat height, floor mounted with manual flush valve, wall hosted family

Product Version: Revit Architecture 2009

30197 Downloads

Working with this family:

-Change type to go from Single to Double sided.

-Use the "Right/Left Handed" yes/no toggles to change direction of the flow of pipe.

-In order to have a double wye connection style - Have *both* the "Right/Left Handed" as well as the "Double Sided - Right/Left" toggle on. (Any questions with this feel free to post comments, and i will be happy to answer.)

-Use the "Center of Connection Point & Stand Notches" for the elevation.

*Note* - Available elevation adjustment is: 4.25" - 9.75"

No rating

Product Version: Revit MEP 2015

849 Downloads

Product Version: Unknown

5378 Downloads

Download: http://nordhem-fi.bimobject.com/LNARE1140 

This is an example of one of the many objects available from this manufacturer on the BIMobject Cloud. Click on the link to find so many more objects which are free for all designers from around the world to use. We also have an amazing app which enables you to access our complete library directly from within your BIM software 

Revit app: http://info.bimobject.com/revit-app

Elegant and timeless Nordhem-towel radiators provide the functionality and warmth to the bathroom. Towel warmers are available with the use of water or a network connection to a battery or electrical connection.

Product Version: Unknown

4824 Downloads

I designed this for an alzheimer unit. It is made so the paients can walk around and exercise.  I coulndnt find one on the site so i made one that would work with my situation. It is attached to the floor and its dimensions are editable. I hope you like it.

Product Version: Revit Structure 2010

5255 Downloads

SERGIO Ansa Single Bowl and Drainer

Overall Measurements: 780x480mm

Bowl 1: 330x380x170mm

Bowl 2: -

Material: 304 Grade Stainless Steel

Gauge: 0.8mm

Internal Bowl Radius: -

Suppliedwith: Basket Waste and Overflow Kit, Sealing Tape, Fixing Clips

FREEPHONE:  0800 222 764

WEB: www.cabro.co.nz

EMAIL: info@cabro.co.nz

The Cabro Group Ltd – your supplier of kitchen sinkware and componentry, specializing in our signature brand SERGIO.

Product Version: Revit Architecture 2011

8746 Downloads

SERGIO Ansa 1 1/2 Bowl and Drainer

Overall Measurements: 980x480mm

Bowl 1: 330x380x170mm

Bowl 2: 200x300x170mm

Material: 304 Grade Stainless Steel

Gauge: 0.8mm

Internal Bowl Radius: -

Suppliedwith: 2 x Basket Waste and Overflow Kits, Sealing Tape, Fixing Clips

FREEPHONE:  0800 222 764

WEB: www.cabro.co.nz

EMAIL: info@cabro.co.nz

The Cabro Group Ltd – your supplier of kitchen sinkware and componentry, specializing in our signature brand SERGIO.

No rating

Product Version: Revit Architecture 2011

4805 Downloads

SERGIO Ansa 1 3/4 Bowl and Drainer

Overall Measurements: 1080x480mm

Bowl 1: 330x380x170mm

Bowl 2: 278x278x170mm

Material: 304 Grade Stainless Steel

Gauge: 0.8mm

Internal Bowl Radius: -

Suppliedwith: 2 x Basket Waste and Overflow Kits, Sealing Tape, Fixing Clips

FREEPHONE:  0800 222 764

WEB: www.cabro.co.nz

EMAIL: info@cabro.co.nz

The Cabro Group Ltd – your supplier of kitchen sinkware and componentry, specializing in our signature brand SERGIO.

Product Version: Revit Architecture 2011

3249 Downloads

SERGIO Ansa Double Bowl Single Drainer

Overall Measurements: 1380x480mm

Bowl 1: 330x380x170mm

Bowl 2: 330x380x170mm

Material: 304 Grade Stainless Steel

Gauge: 0.8mm

Internal Bowl Radius: -

Suppliedwith: 2 x Basket Waste and Overflow Kits, Sealing Tape, Fixing Clips

FREEPHONE:  0800 222 764

WEB: www.cabro.co.nz

EMAIL: info@cabro.co.nz

The Cabro Group Ltd – your supplier of kitchen sinkware and componentry, specializing in our signature brand SERGIO.

Product Version: Revit Architecture 2011

4315 Downloads

SERGIO Ansa Double Bowl Double Drainer

Overall Measurements: 1180x480mm

Bowl 1:330x380x170mm

Bowl 2: 330x380x170mm

Material: 304 Grade Stainless Steel

Gauge: 0.8mm

Internal Bowl Radius: -

Suppliedwith: 2 x Basket Waste and Overflow Kits, Sealing Tape, Fixing Clips

FREEPHONE:  0800 222 764

WEB: www.cabro.co.nz

EMAIL: info@cabro.co.nz

The Cabro Group Ltd – your supplier of kitchen sinkware and componentry, specializing in our signature brand SERGIO.

No rating

Product Version: Revit Architecture 2011

2956 Downloads

Anti climbing bracket for 80 and 100 mm

No rating

Product Version: Revit MEP 2013

493 Downloads

Download: http://geberit.bimobject.com/180100112

This is an example of one of the many objects available from this manufacturer on the BIMobject Cloud. Click on the link to find so many more objects which are free for all designers from around the world to use. We also have an amazing app which enables you to access our complete library directly from within your BIM software 

Revit app: http://info.bimobject.com/revit-app

-The Geberit AquaClean 8000plus leaves nothing to be desired and offers many extra pampering functions in addition to the shower function: the spray temperature and intensity can be adjusted to suit your personal preferences. The pulsating massage function has an invigorating effect, while the soft lady wash is ideal for ensuring gentle personal hygiene for women. As soon as you sit down on the shower toilet, the automatic odour extraction function switches on, creating a pleasant ambience of freshness in the room. After the spray has finished, the integrated warm-air dryer dries you off in comfort. The final practical touch: all functions can be individually adjusted and your preferences saved via remote control.

Product Version: Revit Architecture 2014

11078 Downloads

assign it a rainfall rate, and total surface area (has ability to include vertical surfaces as well)

It will size the pipe dia based on michigan plumbing code

-can be adapted for other states, based on Wade

Based on 1% slope I intend to include rates based on 2% slope at a later date

Product Version: Revit MEP 2009

14204 Downloads

Bacia Deca Nuova c/ caixa acoplada

Product Version: Revit Building 9.1

1388 Downloads

Dear BIM Friends

Body Material: Cast Bronze ASTM B 584

Connection Size: 1/4", 3/8", 1/2", 3/4", 1", 1-1/4", 1-1/2

Connection Type: Threaded FNPT ANSI B1.20.1

Working Pressure: 175 psi

Product Version: Revit MEP 2013

1912 Downloads

This is a 1" Nibco brass ball valve.  The valve is not parametric but the materials can be changed.

Product Version: Revit Architecture 2015

6598 Downloads