Forums >> Community >> Newbies >> floor plan is not shown correct.. some parts are shown as below level

lightshadows23

active

Joined: Thu, Sep 30, 2010
43 Posts

basically there is a problem with level plan 2 . one wall is shown like its bottom one like more lighter line with bold highlight. but i dont see why cause its like the rest which are fine.

also when i try to do camera view on that level it shows the level of roof:S

i attached images who show the level setting- i set it all too 0 and its same thing

the plan and the wall which is shown to be in bottom, the camera view which shows roof and the level 2 area

someone let me know cause its getting frustrating:S i also cant  show the furniture. so something is wrong..

This user is offline

WWHub

site moderator|||

Joined: Tue, May 16, 2006
13079 Posts

Please don't post another huge PDF like that one.  There is no need fo that large of a file.  Look at a simple screen capture program like screenhunter free which will give you a very small file to upload.

Your question is very hard to understand but this might answer it.  Plans should not be cut at the floor level.  Try cutting your plan view at about 1.5 M.

This user is offline

Structural bracing members are not shown correct on plans

5

Walls Not Shown In Ceiling Plan

1

Floor Plan associated to wrong level...

7

Lines are not visible in the plan view

0

Printing only part of the overlay

2